|
|
 |
|
Cym Materiales S.A. to Become ISO 9001-2000 Certified |
|
|
|
Cym Materiales S.A., an established manufacturer of shotblasting machinery serving a number of industries, is pleased to announce having successfully fulfilled the established requirements leading to the award of ISO 9001-2000 by the TUV Rheinland Group.
The ISO 9001-2000 certification further establishes Cym as a premier manufacturer of shotblasting systems.
Manufacturing shotblasting machinery since 1987, Cym Materiales has grown to serve a variety of industries.
Located in Soldini, Argentina, Cym Materiales maintains a staff of 11 administrative, 10 engineering and 30 hourly employees operating within a 1500 square meter manufacturing facility. A second operating division is also located in Campinas, Brazil.
Eric G. Cowes, President |
|
|
|
|
|
|
|
|
|
|
|
|
Since 1960, Cym Materiales SA has provided services to the metallurgical industry.
Cym Materiales SA offers a full line of:
-
Surface Preparation Systems.
- Shot Blast Cleaning Equipments.
- Shot Peening Equipments.
- Air Blast Equipments.
- Wheel Blast Equipments.
- Spare parts
- Cartridges and Bags Dust collectors.
- Sand Blasting.
- Abrasives:
- Cut wire.
- Stainless Steel Shot.
- Glass Bead. s
- Aluminum Oxide.
- Wet Blast Equipments.
- Spare parts.
In addition to this we pay personal attention to our customers needs and requirements. |
|
|
|
|
|
|
Blasting system is a method that prepares a surface by removing all kinds of coatings and pollutants such as old paint layers, foils, casting filings, etc.
At the same time pollutant removal produces rugosity over the treated surface, not only improving its visual aspect but also giving depth so that any kind of coating or paint can be applied.
The rugosity obtained by blasting will depend on the type of abrasive used and on the hardness of the surface to be blasted.
As a result rugosities ranging from 5 microns up to more than 150/200 microns can be obtained.
Another advantage of the system is that it leaves the surface clean and dry eliminating the drying time that is required to apply any coating; time which is wasted in processes such as chemical damp blasting, descaling or high pressure hydrowash.
Besides providing cheap, fast and easy operating processes, blasting machines by centrifugal turbines or compressed air also have the great advantage of being closed circuits, therefore, they avoid environmental pollution and put workers under no risks.
Cym Materials can offer different equipments to be used in the blasting of all kinds of parts. They are easy adapted to the diversity of works needed in the industry. Whether they are high volumes of work such as ships, petroleum tanks and railway wagons or small amounts such as screws or glasses frames.
The great number of shot blasting machines sold in the metallurgical industry over the past years proves our success. |
|
|
|
|
|
|
| If you are looking for something that is not mentioned on this site, do not hesitate to ask our sales and engineering departments. They will be pleased to give you any kind of information related to our equipments, processes, productions and automations. Moreover, our facilities and equipments are available in case you need demonstration. |
|
|
|
|
|
|
|
|
|
|
|
 |
Cym Materiales S.A. |Shot Blast Machines
Brig. Estanislao Lopez Nº 6
[S2108AIB] Soldini - Santa Fé - Argentina
Tel: [54-341] 490 1100 | Fax: [54-341] 490 1366
E-mail: infocym@cym.com.ar |
|
|
|
 |
|
)
