| Cym Materiales SA manufactures portable closed-circuit for blasting floors, vertical for blasting walls and compressed air blasting machines, according to the needs of each customer.
The portable closed-circuit system is not only economical, fast and of simple operation but also avoids environmental pollution and allows to work inside closed areas without any risks for the operators. Besides, the abrasive used is recycled which saves costs.
Portable blasting machines remove, clean and leave a rough texture at the same time.
This unit leaves the surface clear and dry, ready to be painted, which eliminates the drying process that is required before a covering is done to the wall (as it is the case of the
chemical, damp blasting defalshing or high pressure hydro washing that needs time before continuing with the next process)
Portable blasting machines for floors can be used on steel, concrete or asphalt. It is mainly used for cleaning ship deck, top/bottom sides of petroleum tanks, naval steel sheets, industrial floors, airport tracks, etc. The abrasive is propelled by centrifugal turbines
General Technical data of GPP-5 portable blasting machine for floors
- Blasting register: 240 mm
- Production
-
Steel between 15 to 20 m2 per hour
-
Concrete/asphalt: 40 to 60 m2 per hour
- Blast consumption varies from 0.3 kg/m2 to 1 kg/m2
- Total power installed: 11 Hp-8.25 Kw
- Required compressed air: 105 liters/min to 6 kg pressure
|
General Technical data of GPP-20 portable blasting machine for floors
- Blasting register: 450 mm
- Performance:
-Steel between 50 to 60 m2 per hour
-
Concrete/asphalt: 150 to 180 m2 per hour
- Blast consumption ranges from 0.3 kg/m2 to 1 kg/m2.
- Total power installed: 28 Hp-21 Kw.
- Required compressed air: 105 liters/min to 6 kg pressure
|
|
)
